XE-300型硅鋼片剪板機（硅鋼片剪片機）
    江陰如一科技發展有限公司生產300型硅鋼片剪板機是針對材料寬度小于300mm的硅鋼片材料進行沖孔促進進步、剪切加工發力，適用于對變壓器鐵心、電抗器鐵芯迎來新的篇章、電焊機鐵芯等精確加工共創美好，剪切沖孔毛刺小于0.02mm,尺寸精度小于0.05mm，鐵芯橫剪線產品一致性好空白區，不會產生高低片等問題協調機製，尤其在加工取向硅鋼方面更是得心應手，能夠快速剪切有取向硅鋼形勢，產生的應力小實踐者，對剪切刃口磨損小，模具研磨間隔時間長約定管轄，有效地提高加工效率以及加工精度數據，提高產量和降低生產成本。
    針對材料不同長度的特點利用程序自動調節發揮，只需要將需要的長度輸入就可以獲得準確的尺寸顯著，同時也可以對因送料輥精確度的誤差而進行補償，以達到最佳效果開放以來。
    本設備采用臺灣臺達和東元的伺服電機以及PLC占，全中文觸摸屏獨立的控制柜，能夠有效的避免因設備振動給電器帶來的各種影響提供了有力支撐。

300 CNC Traverse Cutting Devices are used for punching and cutting of the 300mm silicon steel sheets, applicable to the precision processing of the transformer cores, reactor cores and electric welder cores with the punch/cutting burrs smaller than 0.02mm and the size precision controlled between plus and minus 0.05mm. Iron core products enjoy good conformity without chip level problems. It is especially the case with the silicon steel processing, where the device can rapidly cut the orientated silicon steel with small stress, little abrasion to the cutting blade and long sharpening intervals for the mold. It can promote the processing efficiency and precision, raise the output and reduce the productive costs.
Automatic adjustment will be made by the programs according to different lengths of the materials. Input of your desired length will give you the accurate size. At the same time, compensation can be made up for errors of the precision of feed rolls as to achieve the best results.
This device uses the servo electric motors and PLC of Taida and Dongyuan of Taiwan and separate control by the full Chinese touch screen. It can effectively avoid various affections upon the electric equipment due to vibration.